Descargar Imprimir esta página

Victron energy MPPT 150/45-MC4 Manual página 23

Ocultar thumbs Ver también para MPPT 150/45-MC4:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Specifications, 150V models continued
SmartSolar charge controller
Battery voltage
Maximum battery current
Nominal PV power, 12V 1a,b)
Nominal PV power, 24V 1a,b)
Nominal PV power, 36V 1a,b)
Nominal PV power, 48V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit
voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals 4)
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher short circuit current may damage the controller in case of reverse
polarity connection of the PV array.
3) Default setting: OFF
4) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels
MPPT 150/85
12/24/48V Auto Select (36V: manual)
85A
1200W
2400W
3600W
4900W
70A (max 30A per MC4 conn.)
150V absolute maximum coldest conditions
145V start-up and operating maximum
Less than 35mA @ 12V / 20mA @ 48V
Default setting: 14,4V / 28,8V / 43,2V / 57,6V
Default setting: 13,8V / 27,6V / 41,4V / 55,2V
Default setting: 16,2V / 32,4V / 48,6V / 64,8V
multi-stage adaptive
algorithms) or user defined algrithm
-16mV/°C / -32mV/°C / -64mV/°C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
5000m (full rated output up to 2000m)
DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC
ENCLOSURE
35mm² / AWG2 (Tr models),
or three pairs of MC4 connectors (MC4 models)
35mm² / AWG2 or three sets of MC4 connectors
IP43 (electronic components)
Tr models: 216 x 295 x 103mm
MC4 models: 246 x 295 x 103mm
STANDARDS
EN/IEC 62109-1
21
MPPT 150/100
98%
(eight preprogrammed
95%, non-condensing
Indoor, unconditioned
PD3
VE.Direct or Bluetooth
Yes (2 pole connector)
Yes (not synchronized)
Blue (RAL 5012)
IP22 (connection area)
4,5kg
, UL 1741, CSA C22.2
100A
1450W
2900W
4350W
5800W

Publicidad

loading