Publicidad
CEILING MOUNT
Once the installation location has been determined (see pages 4 and 5), please proceed with the following steps.
NOTE: It is recommended that this product be installed using a 4" round ceiling box rated for a minimum of 50 lbs (23 kg).
1. Orient the provided Crossbar Plate (219-1746) to best match the installed 4" round ceiling box. Insert two #8-32 screws [203-1153]
through the threaded holes in the Crossbar Plate. The screw heads should face the inside of the ceiling box.
2. Turn the screws until they are bottomed out on the plate.
3. Pass the Ceiling Adapter through the Adapter Slip [220-1266-XX], Crossbar Plate, Lockwasher [203-1679], and Hex Nut [203-1678].
Tighten the Hex Nut using an 11/16" wrench.
1
2
© 2024 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
3
9
Part no. CB-209-1455 01/25/2024
Sculpt Hanging Mirror Installation
Publicidad
