Baxi Luna 3 Comfort Manual Para El Usuario Y El Instalador página 7

MONDY DAY 1
TUEDY DAY 2
WEDDY DAY 3
(wednesday)
THUDY DAY 4 (thursday)
FRIDY DAY 5
SATDY DAY 6 (saturday)
SUNDY DAY 7
To set a single time band, proceed as follows:
1) Press the IP button and then the button
2) choose a day of the week (1...7) by repeatedly pressing the
buttons +/- ;
3) press the OK button;
4) the display shows the message on 1 and the 4 digits of the time
flashing, as shown in the figure below;
5) use the buttons +/-
6) press the OK button;
7) the display shows the message of 1 and the 4 digits of the time
flashing;
8) use the buttons +/-
9) press the OK button;
10) repeat the same operations (from point 4) to set the remaining
three time bands;
11) press the IP button to exit the function.
Programming in
HEATING MODE
Note: By setting the lighting time on... equal to the switching off time of..., the time band is cancelled and the program
goes to the next time slot.
(ex. on1=09:00 - of1=09:00 the programme "skips" time band 1 and continues with on2...).
3.6.2. Groups of days
This function enables the programming of 4 common boiler activation and deactivation time slots for several days or the
entire week (see the summary table below).
To set a single time band, proceed as follows:
1) Press the IP button and then the button
2) Select a GROUP of days by repeatedly pressing the buttons +/-
3) press the OK button
4) repeat the operations described in points 4-10 of paragraph 3.6.1.
INSTRUCTIONS PERTAINING TO THE USER
On 1 Of 1
(monday)
(tuesday)
06:00 08:00
(friday)
(sunday)
;
to set the boiler lighting time;
to set the boiler switching off time;
;
FACTORY SETTINGS
On 2 Of 2 On 3
11:00 13:00 17:00
PROGRAMMED TIME BAND
;
7
Of 3 On 4 Of 4
23:00 24:00 24:00
09:00 - 12:00
Day of the week
Monday
7864174 - en