Publicidad
t
s
ecHnIcal
ervIce
For more information or technical service contact your local VWR representative or visit www.vwr.com.
Web resources: Visit VWR's website at www.vwr.com for:
• Complete technical service contact information
• Access to VWR's Online Catalogue, and information about accessories and related products
• Additional products information and special offers
t
roublesHootIng
To clear error press the standby button
Problem
Unit fails to power on
E1
E2
E3
Errors will cause heating function to cease. Timing functions will be unaffected.
10
Cause
Missing or blown fuse
Faulty temperature sensor
Thermocouple failure or
Heating element failure
Unit cannot reach set-point or
Probe not in thermometer well
Solution
Add or replace fuse as necessary.
If problem persists, please contact your VWR representative for repair.
This error cannot be fixed by the end user.
Please contact your VWR representative for repair.
This error cannot be fixed by the end user.
Please contact your VWR representative for repair.
If using probe, verify probe is in thermo well and follow Single Point Calibration
instructions on page 10. If problem persists, please contact your VWR representative
for repair.
EN
Publicidad
