Publicidad
B.
C.
D.
M
b
H
c
P
InI
lock
eater
ontrol
The front panel of the Mini Block Heater contains all the controls and displays needed
to operate the unit.
A. Standby button/standby indicator light: The standby indicator light will
illuminate when the unit is plugged in. The unit will be in standby mode. Press the
standby button to illuminate the displays. The standby indicator light will shut off.
Press the standby button again and the unit will once again be in standby mode.
B. Caution hot top symbol: Printed on control panel. Unit can reach temperatures
above 40°C.
anel
C. Temperature display: Displays the actual temperature and will beep when the
set-point temperature is reached. D. Up/down arrows for set-point control. On/off
button starts/stops the heating function.
E. Time display: Displays accumulated time (continuous mode) or remaining time
(timed mode). The display range is from 0 to 9,999 minutes in one (1) second
increments. The display will indicate minutes and seconds until the timer reaches
99 minutes and 59 seconds (99:59), then the display will automatically display
minutes up to 9,999. F. Up/down arrows for set-point control.
EN
E.
A.
F.
5
Publicidad
