Technical Data
Vibratory rammer
Art. No
Engine type
Rated power
Contents
tank capacity
Vibrations per minute
compacting pressuremax.
Work plate
Overall dimensions LxWxH in mm: App. 270x295x200
Weight
Noise details
Sound pressure level L
1)
pA
Measured sound power level L
Guaranteed sound power level L
Measured according to EN ISO 3744, 2000/14/EG+ 2005/88/EG;
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 500:
Vibration emission value a
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the
operating instructions before using
the appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Persons over 18 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
Unleaded petrol
Engine oil 10W-40
1)
WA
WA
h
Uncertainty K = 2,5 dB (A)
1)
This appliance has not been designed to be used by
persons (including children) with reduced physical, sen-
sory or mental capabilities or with a lack of knowledge
or experience.
Children must be supervised in order not to play with
the machine.
Specified Conditions Of Use
The vibrating plate is exclusively intended to be used
for compressing small to medium areas, foundations,
terraces, pavements and driveways made of the
following materials:
sand, shingle, gravel, crushed stone, asphalt, low-
cohesive mixing materials
ENGLISH
GVS 80
55540
4-stroke motor
3,2 kW / 4,4 PS
149 cm
3
2,2 l
0,35 l
450-650 / min
10 kN
330 x 290 mm
720 x 420 x 950 mm
79 kg
89,9 dB (A)
103 dB (A)
105 dB (A)
6,5 m/s²
23