GPO RANGEGUIDE 2800 8x50 Modo De Empleo página 26

Overview of displayed information
Binoculars Target marker
Best / Last Target
88888
BEST
LAST
88888
HR
Horizontal distance
(HR)
Angle in Degrees
Number display for HR / angle / temperature
The red OLED target marker always lights up when active.
The first line of the display always shows the direct distance
in meters (M) or yards (Y).
You can choose whether the second line of the output
displays the measured values for the horizontal distance (in
meters or yards), the angle (in + / - degrees) or the
temperature (in degrees Celsius or degrees Fahrenheit).
Direct disctance
(LOS) with units
(meter / yard)
M
Y
°
M F
Y C
Temperature in deg
Celsius / Fahrenheit
Units of HR (meter / yard)
50 50
Basic display functions
(Brightness, Meter/Yard, °C/°F, BEST/LAST)
To change the basic display options, switch the instrument
on by pressing the measurement button and briefly (< 2 sec)
press the menu button
M
seconds.
The brightness display will then flash LEV 4. You can increase
the brightness with the measurement button continuously
up to level 9 and then again from 1 to 9. Confirm the
brightness adjustment with the Menu button and proceed
to the Meter / Yard selection.
Now the unit M or Y to be selected will flash. Select either M
or Y using the measurement button . Confirm by pressing
the menu button to proceed to the temperature selection.
M
Now the unit °C or °F to be selected will flash instead. Press
the measurement button
or °F. Confirm by pressing the menu button .
Finally, you will reach the BEST/LAST target selection. Again,
the BEST or LAST setting to be selected will flash. Please use
the measurement button to select the appropriate setting
and confirm using the menu button .
Once you have completed these 4 options, you have
configured your RANGEGUIDE 2800. Adjustments should
then only be made to the brightness in the basic settings.
However, you can change the 4 options selected here at any
time by following the procedure described above again. For
details on the settings, see the following pages.
51 51
within the standby time of 15
M
to advance and select either °C
M
M
EN IT