Recording After Power Interruption Or Moisture Condensation; Monitoring The Recording Condition - Sony SVT-5050P Manual De Instrucciones

Recording after Power Interruption
or Moisture Condensation
If a power interruption occurs, The P indicator lights in
the display window and if a moisture condensation
occurs, the "dddd" indicator flashes. Even if a power
interruption or moisture condensation occurs while
recording, the internal batteries provide backup power
for memory for at least 30 days. The internal batteries
can be charged in about 48 hours.
If the power is interrupted during recording, the
recording starts automatically after power is restored.
To check power interruptions or moisture
condensation
1
1
Turn on the power of the equipment to be used.
2
Press MENU until the POWER LOSS/DEW LOSS
display appears.
This shows a count of the power interruption and
moisture condensation and the period when the
recording was interrupted.
Count of power interruption
<
P O W E R L O S S
0 0 2 F A I L 1 2 - 2 0
R E T 1 2 - 2 0
<
D E W L O S S
0 0 1 F A I L 1 2 - 1 0
R E T 1 2 - 2 0
Count of moisture condensation
2
>
0 7 : 1 5
0 7 : 3 0
>
No recording
periods
1 1 : 0 0
1 2 : 0 0
To clear the P indicator
MENU RESET
Press MENU RESET.
To clear the power loss /dew loss data
Press MENU RESET while the POWER LOSS/DEW
LOSS display is on the screen.
Monitoring the Recording
Condition
You can check the recording condition by pressing
REC CHECK while recording in time lapse mode.
Press REC CHECK while recording.
After the tape is rewound for about three seconds and
played back for about two seconds, the unit returns to
the original recording mode.
Note
While monitoring the recording condition, recording is
interrupted.
REC CHECK
17