Alarm Recording; Connecting An Alarm Sensor; Setting The Alarm Speed And Duration - Sony SVT-5050P Manual De Instrucciones

Alarm Recording

You can use a door switch or alarm sensor to trigger
alarm recording. You can make alarm recording in
recording mode, stop mode, power off mode and one-
shot recording mode with the selected recording speed.

Connecting an Alarm Sensor

to COM
to COM
Setting the Alarm Speed and
Duration
Setting with ALARM SPEED and ALARM
DURATION on This Unit
ALARM SPEED
ALARM DURATION
1
Set ALARM SPEED to 3H, 12H or NC.
3H: for recording in 3-hour mode
12H: for recording in 12-hour mode
NC: for recording at the same speed as before the
alarm was received.
Commercially available
switching box, etc.
to ALARM OUT
to ALARM IN
2
Set ALARM DURATION to 20S, PROG
(program) or CC.
20S: for recording for 20 seconds
PROG: for recording for the duration set on the
monitor
CC: for recording as long as the alarm signal is
being input
Setting the Alarm Duration on the Monitor
1
2
1
Turn on the power of the equipment to be used.
2
Set ALARM DURATION to PROG.
3
Press MENU until the ALARM SET display
appears on the screen.
<
I S H O T S E T
F I ELD
I NTERVAL
<
A L A R M S E T
DURAT I ON
SER I ES
4
Press SHIFT $ to move the flashing to
DURATION.
5
Set the alarm duration by pressing REC/PLAY
SPEED +/–.
You can set the alarm duration to 20S, 40S, 1M,
2M, 3M, 4M, 5M or CC.
<
I S H O T S E T
F I ELD
I NTERVAL
<
A L A R M S E T
DURAT I ON
SER I ES
8 3 4-7
>
I
I M
>
2 0 S
N
>
I
I M
>
Alarm duration
I M
N
25