Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
WARNING! After a long storage period, check that the
burners (venturi tubes) are not blocked by insects: risk
of fire or flame flashback. If necessary, clean the inside
of the burners (venturi tubes) with a pipe cleaner.
• Damage caused by fat fires is not covered by the warranty.
Troubleshooting
IMPORTANT:
NEVER DISMANTLE THE GAS RAMP
•
FITTED INTO THE BARBECUE (located behind the front control panel)
•
NOR THE VALVES OR INJECTORS
•
Problem
encountered
2 burners will light,
but not the 3
or
rd
1 burner will light
but not the 2
nd
Flames are coming
out of one of the
knobs on the front
control panel
Possible causes
• Burner (venturi
tube) and/or
injector blocked
• Immediately close the gas valve. Do not perform any
replacement tests on the knob in question, but take off the
burner and clean both it and the injector with compressed air
(generally available from your dealer).
15
Proposed solutions
Take off the burner that is not working
and replace it for test purposes by one
of the other (working) burners that you
have also dismantled. Test to see if it
will have good color of flame:
• If the «replacement» burner
(used for the test) does not light.
This means that the injector is
blocked. Clean it with compressed
air (generally available from your
dealer).
• If the « replacement » burner (used
for the test) lights. This means that
the initial burner is blocked. Clean
it with compressed air (generally
available from your dealer).
EN
Publicidad
