Sharp PS-921 Manual Del Usuario página 5

What is included in the box
• 1 × PS-921
• 1 × Power Adapter with AC plug
• User documentation
Panels & Controls
TOP VIEW
(Refer to 1 on page 1).
1. – Press the button to turn on the unit. Long press the button to
turn off the unit.
2. – Short press: changes the front light mode
Long press (2 sec): changes the side light mode
Longer press (4 secs): switch all the lights off
3. – Short press the button to toggle between Bass & 3D surround
sound modes:
A long press of the button will swich off both modes: Bass Off, 3D Off.
4. – Press the button to turn up the volume. Long press the button
to skip to the next playing track.
5. SOURCE – Press the button repeatedly to switch the playback mode:
Bluetooth, AUX, USB. A long press of the button will activate the TWS/
Duo mode function.
Note that the USB mode can only be selected if a USB stick is plugged
into the unit.
6. – Press the button to play or pause the playback. Long press of
the button will disconnect bluetooth connection.
7. – Press the button to turn down the playing volume. Long press
the button skip to the previous playing track.
8. SOURCE INDICATOR
Bluetooth
Bluetooth pairing
USB
AUX
9. BATTERY STATUS INDICATORS
10. 3D/Bass indication
Bass OFF / 3D OFF
Bass OFF / 3D ON
Bass ON / 3D OFF
Bass ON / 3D ON
11. RECHARGING INDICATOR – When the charger is connected, red light
turns on. When the device is fully charged, the red light turns off.
REAR VIEW
(Refer to 2 on page 1).
1. DC 18V – AC Adapter input port.
2. USB PORT – The USB 2.0 5V/1A port allows you to charge your mobile
device from the speakers built-in battery. You can also playback MP3
audio files stored on a USB device up to 32GB which uses a FAT32 file
system.
3. AUX IN JACK – Connect other audio devices via a 3.5mm jack audio
cable.
x3 flash
slow flash
slow flash
fast flash
Operation instruction
Charging the Speaker
(Refer to 3 on page 1).
This speaker uses a built-in battery pack. Before using it, charge the
batteries by connecting the AC adapter.
Connect the AC power adapter (supplied) to the DC 18V input port on the
rear of the unit, and then to the wall outlet.
CAUTION:
ū Only use the AC adapter supplied with this device. If you do not use the
supplied AC adapter charging performance could be affected and it may
cause permanent damage.
Power On the Speaker
Press button on the top panel of the unit to power on.
The first time you use the speaker, the "Source indicator" flashes blue,
indicating that the unit is in paring mode.
TIPS:
ū In order to disable or enable the voice prompts, please press and hold
SOURCE button 3 seconds during power up operation.
ū When you power on the speaker again after Bluetooth setup, the unit will
search for the previous paired device. Once found, it will pair with that
device automatically.
Power Off the Speaker
Long press the button to turn off the unit.
After 15 mins with no activity/connection the unit will automatically power
off to conserve the battery.
Bluetooth Connection
1. Press the SOURCE button repeatedly until the voice prompt states
"Bluetooth".
2.
Make sure that the unit is in pairing mode (blue light flashing).
3. Enable Bluetooth on the device to be paired with the unit. Select
''Sharp PS-921,, from the available devices (enter the password
''0000,, if necessary) to start pairing and connection with the unit.
4.
After successful connection the "SOURCE INDICATOR" will turn solid
blue and you will hear a voice prompt ("Connected").
5. This unit is compatible with the voice assistant on your smart device.
NOTES:
ū This speaker supports automatic connection with a previously paired device
after power off and power on again.
ū If you want to pair with a new Bluetooth device, you must disconnect the
paired device.
ū To disconnect the Bluetooth connection, long press
turn off the Bluetooth function in your smart device. The voice prompt will
state "disconnected" when complete.
Connect two PS-921 via Bluetooth (TWS)
TWS/True wireless Stereo - Duo Mode
• This allows for two PS-921 party speakers to be connected together
as left and right stereo speakers for a wider stereo sound-stage. The
first speaker is the primary one (left audio channel) and the second the
secondary (right audio channel).
• Press and hold the SOURCE on the first speaker until the speaker says
"Duo Mode pairing" then release the button.
• Press and hold the SOURCE button on the second speaker until the
speaker says "Duo Mode pairing" then release the button.
• Please wait until speakers say "Duo Mode connected". The speakers are
now connected to each other.
• Pair the primary speaker with your phone.
• For Bluetooth pairing to a Bluetooth-out enabled smart device search for
Bluetooth Pairing name "Sharp PS-921" on your device and pair.
EN
button or you can