Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly instructions
1. Use the provided screw to secure the motor body onto the control body.
2. Align the base with the fan and use the plastic base screw to secure them together.
3. Set the back grill and fit it well on the motor body and secure it with the back grill nut.
4. Install the fan blade onto motor shaft and fit the blade nut.
5. Open front grill clip and position front grill onto rear grill, close the front grill clip and
secure it with the provided screw.
6. Insert the corrugated hose into the control body and spray cap on the front grill.
7. Open water tank plug like below to fill the tank with water:
English - 4
Publicidad
