Putting Into Service; Electrical Connection - HAEGER Black Mist II Instrucciones De Uso

8. Insert water tank in control body like below:

Putting into Service

Working place
Choose a suitable location and a non-slip, flat surface.
Never place the device directly next to heaters or other heat sources. There is always the
danger of fire!

Electrical Connection

1. Connect the device to a duly installed 220-240V~50/60Hz protective contact socket.
2. Before inserting the plug into the socket, make sure that the mains voltage to be used
matches that of the device. You can find this information on the nameplate.
English - 5