Parkside PAS 5 D5 Instrucciones De Utilización Y De Seguridad página 72

˜ Changing rotary direction
Push through the rotation direction switch
direction (Fig. C):
Switch pushed from
Right
Left
˜ LED work light
Set the rotation direction switch
protrudes equally on both sides.
The LED work light
the immediate work area.
Switching on the LED work light
trigger .
[ ]
Switching off the LED work light
˜ Changing bits
Pull out the bit
(Fig. D).
70 GB/IE
Direction
(b)
Tighten screws
Loosen screws
(a)
can be switched on separately to illuminate
[ ]
. Insert another type of bit into the bit holder
9 ] [
to set the rotary
[ 4 ]
Direction indicator
to the middle position so that it
4 ] [
: Press down the switch
[ ]
: Release the switch trigger
[ ]
1 ] [
3 ] [
.
[ ]
[ ]