Publicidad
Idiomas disponibles
Idiomas disponibles
The massager
does not work
The massage
intensity is too high
or too low
No heating or
insufficient heating
The touch panel is
not working
properly
1. Disconnected power
or loose plug causing
poor contact.
2. The power button is
off or the timer has
been reset.
3. The motor auto
shuts-off due to the
device being on too
long activating
overheating protection.
1. Your foot is
positioned at the
wrong angle.
2. Didn't choose
intensity level which is
right for you.
1. The heating function
is turned off.
2. The product
structure and working
principle limits how fast
the bottom can heat
up. Therefore, the
heating-up may seem
a bit slow, 7-10
minutes before you can
feel the obvious heat.
1. The plastic film on
the touch panel is not
removed.
2. Fingers are wet.
3. Insufficient touch
area.
06
1. Re-plug to the power source.
2. Turn on the power button.
3. Use the massager after the
motor cools off naturally.
1. Adjust the contact angle to get
moderate intensity.
2. The massager has 4 intensity levels,
choose the intensity you prefer. We
recommend low intensity to begin with.
Or individually choose air pressure or
kneading function to reduce the intensity.
1. Turn on the Heat Button.
2. It takes about 7-10 minutes to
fully heat up. Please be patient as
this is to avoid the temperature
rising too fast.
1. Remove the plastic film before
use.
2. Dry your fingers before touching
the button.
3. Use your thumb to press
buttons to get better touch
sensitivity.
EN
DE FR IT ES
Publicidad
