Publicidad
Idiomas disponibles
Idiomas disponibles
PPDRAW
internal body of the machine is too high, the output voltage will be automatically
turned off and a temperature alarm interface will be displayed. If temperature
protection occurs, you need to wait until the temperature returns to normal before
outputting voltage again.
6. When the machine is charging, for safety reasons, the Smart Output function will be
disabled or automatically turned off, and no voltage or current can be output. To use
the Smart Output function, please unplug the charging cable first.
V . Troubleshooting
Fault phenomenon
The Smart Output function cannot
be used and it prompts that the
temperature is too high.
The Smart Output function cannot
be used, and it prompts that the
Smart Output function is not
allowed to be used during charging.
Unable to turn on and off
Unable to charge or not fully
charged
APP cannot connect
Solution
After the temperature rise reaches the
upper limit after high current operation, the
temperature protection program starts and the
output is prohibited. The user waits for a while
and the fault disappears automatically after the
temperature returns to normal.
Unplug the charging cable.
This product requires a long press of the power
button to turn it on and off. Please ensure that
the long press time is more than two seconds.
If long pressing does not solve the problem,
the battery may be too low. Please use the
charging cable to charge the battery.
Please use standard chargers and charging
cables.
Please make sure the machine's Bluetooth
connection function is turned on.
3
EN
Publicidad
