American Standard 2764 Serie Instrucciones De Instalación página 3

DRAIN Step 6
Adjust brass Plunger Bolt and Lock Nut for a 1/2"-5/8" minimum
opening, then tighten Lock Nut against Plumber Shaft to secure
height adjustment.
CAUTION: Plunger Lock Nut must be tightened against plunger
!
shaft prior to tub use.
DRAIN Step 7
TEST DRAIN OPERATION BY TURNING OVERFLOW HANDLE AS FOLLOWS:
TO OPEN DRAIN:
Turn knob 1/8 turn clockwise (K).
DRAIN KNOB
K
OPEN
4
A. Apply silicone caulk to the bottom of tub as shown.
B. Place tub into cover. Make sure to evenly center the tub onto the cover.
The gasket will be compressed between the tub and cover.
5
A. Tighten drain connections through access panel
and install faucet per instructions included.
TUB SHOWN WITH OPTIONAL FREESTANDING
TUB FILLER INSTALLED
PLUNGER ASSEMBLY
TO CLOSE DRAIN:
Turn knob 1/8 turn counterclockwise (L).
1/2"-5/8"
L
CLOSE
6
A. Push drain access panel in place.
TUB SHOWN WITH OPTIONAL FREESTANDING
3
BRASS PLUNGER
BOLT & LOCK NUT
DRAIN KNOB
TUB FILLER INSTALLED
754782-100 Rev. 8 7/19
1/2"-5/8"
1/2"-5/8"