FUXTEC FX-E2KS Manual De Instrucciones página 31

Original manual FUXTEC FX-E2KS rev01
- Follow the manufacturer's instructions for sharpening and maintenance of the saw-chain. Too low
depth limiters increase the tendency for kickback.
After use
- Turn off the device, remove the battery and then place the device in a safe place.
- Do not store the device within the reach of children.
- Make sure that the ventilation slots of the device are free from dirt.
- Replacement parts must meet the requirements specified by the manufacturer.
For this reason, only original spare parts or spare parts approved by the manufacturer should be
used. When replacing the device, please observe the installation instructions provided and remove
the
Battery.
- Only have repairs performed by a qualified specialist or a specialist workshop.
Safety information for the charger
- Keep the charger away from rain or moisture. Water entering a charger increases the risk of electric
shock.
- Keep the charger clean. Soiling increases the risk of electric shock.
- Check the charger, cable and plug before each use. Do not use the charger if you notice any
damage. Do not open the charger yourself and have it repaired by qualified personnel using only
original spare parts.
Damaged chargers, cables and plugs increase the risk of electric shock.
- Do not place any objects on the charger or place it on soft surfaces. This could result in a fire
hazard.
- Always check that the mains voltage corresponds to the voltage indicated on the charger's rating
plate.
- Never use the charger if the cable, plug or the device itself is damaged by external influences. Take
the charger to the nearest specialist workshop.
- Never open the charger. In the event of a fault, take it to a specialist workshop.
31