Chauvin Arnoux 560CA1631 Manual De Instrucciones página 20

Voltage / current calibrator C.A 1631
In order to avoid any risk of electrocution or bodily injury:
•
Never apply a voltage exceeding 30 V between two terminals or between
a terminal and earth,
•
Make sure that the battery compartment cover is closed and locked before
using the calibrator,
•
Disconnect all leads from the calibrator before opening the battery
compartment cover,
•
Do not use the calibrator or its leads if they seem damaged,
•
Do not use the calibrator in the presence of an explosive gas, steam, or
dust,
In order to avoid damaging the calibrator:
•
Use only the terminals corresponding to the function chosen.
•
Do not apply a voltage or current to the calibrator when it is not in
operation.
The voltage/current calibrator is a measuring device. It can be used to measure or
to deliver a DC current loop between 0 and 24mA and a DC voltage between 0 and
20V. But it cannot be used to measure and deliver this current or this voltage
simultaneously.
PRECAUTIONS FOR USE
1 INTRODUCTION
20
English