Descargar Imprimir esta página

nedis WIFIDS20WT Guia De Inicio Rapido página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
4
The product can also be installed on a sloped ceiling.
-
Do not install in the tip of a sloped ceiling as smoke-free air can collect in
these areas, preventing smoke from reaching the product.
In sleeping areas:
Not in turbulent air (near windows, ceiling fans or air conditioners).
Not behind objects (curtains or closets).
Other areas:
Not in turbulent air (near windows, ceiling fans or air conditioners).
Not behind objects (curtains or closets).
For optimal smoke detection install the product at a minimal height of 1.80 m.
4
Do not install the product:
in dirty, greasy or dusty areas.
in temperatures below -10 ºC.
in temperatures above 55 ºC.
in turbulent air (near ceiling fans, air conditioners or open windows).
within 3 meters of a high humidity source.
within 1.5 meters of kitchen appliances.
within 6 m of a furnace or fuel burning heat sources.
behind objects like curtains or closets.
within 1 m of fluorescent light.
Installing/Mounting the product (image C & D)
1. Place the bracket A
Follow steps 2. - 6. for stone/concrete surfaces. Continue to step 5. for wood
surfaces.
2. Use the bracket A
3. Drill two Ø 4 mm holes.
4. Insert the plugs A
5. Fasten the bracket A
5
in the desired location.
5
to mark the drill locations with a pencil.
8
into the holes.
5
with the screws A
7
.
12

Publicidad

loading

Este manual también es adecuado para:

Wifids20wt3Wifids20wt3 ws550783974