cecotec ENERGYSILENCE 2000 SKYCOOL Manual De Instrucciones página 41

3. ASSEMBLING THE APPLIANCE
1. Turn the appliance upside down and remove the base. Join the two halves and turn them
over. Put the base on the bottom of the fan. Fig. 2
2. Next, tighten it securely until you hear a click. Fig. 3
3. To remove the base, press the latch. Fig. 4
Filling up the water tank
1. Remove the water tank.
2. Fill with cold, clean water. Make sure that the water level is between the "MIN" and "MAX"
mark.
3. To make air cooler, put the ice packs on the tank. To do this, fill the ice packs with water and
put them in the freezer until they are completely frozen.
4. Close the water tank.
Warning! Make sure that the product is unplugged from the power supply before filling or
refilling the water tank.
5. Only put water in the water tank. Do not add any chemicals, oils, or other substances.
6. Only put cold water in the water tank.
7. Make sure that the water level in the tank exceeds the "MIN" mark, but not the "MAX" mark.
8. Do not use any function that requires water if the tank is empty.
Ice packs
1. Open the water tank and fill it up to the "MAX" mark.
Note: do not ingest the substances inside the ice packs.
2. Fill the ice packs with water, close the lid and put them in the freezer until they are
completely frozen.
3. Place the ice packs at the bottom of the tank.
Caution: keep children away from the ice packs.
4. OPERATION
Speed knob
It is used to switch on the air cooler and select the speed.
Set the knob to the desired speed.
ENERGYSILENCE 2000 SKYCOOL
ENGLISH
41