Waeco PerfectView M59L Instrucciones De Montaje página 38

_M59L_EB_10s.book Seite 38 Dienstag, 22. Januar 2008 4:59 16
Safety and installation instructions
When connecting to cable 31 (earth), screw the cable
– To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet-metal bodywork with a cable lug and a self-tapping
screw.
Ensure that there is a good earth connection.
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
The following data must be set again, depending on the vehicle equip-
ment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate
operating instructions.
Observe the following installation instructions:
Secure the monitor in such a way that it cannot become loose under any
circumstances (sudden braking, accidents) and cause injuries to the oc-
cupants of the vehicle.
Secure any parts of the system covered by the bodywork in such a man-
ner that they cannot be come loose or damage other parts and cables and
impair vehicle functions (steering, pedals, etc).
Do not attach the monitor in the air bag deployment path, as this could
cause injury if the airbags are triggered.
To prevent damage, when drilling ensure that there is sufficient space on
the other side for the drill head to come out (fig. 2, page 4).
Deburr all drill holes and treat them with a rust-protection agent.
Always follow the safety instructions of the vehicle manufacturer.
Some work (e. g. on retention systems such as the AIRBAG etc.) may
only be performed by qualified specialists.
38
PerfectView