Bosch 0 603 3B1 402 Manual Original página 18

18 | English
(18) Auxiliary handle (insulated gripping surface)
(19) Hex key storage
a)
(20) Extraction hose
(21) Deflection tube for chips
(22) Spindle lock button
(23) Hex key
(24) Clamping bolt with washer
(25) Clamping flange
(26) Mounting flange
(27) Saw spindle
(28) Cutting depth scale
(29) Lever for cutting depth preselection
(30) 0° cut mark
(31) 45° cut mark
a)
(32) Guide rail
(33) Button for guide rail locking mechanism
a)
(34) Screw clamp
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Circular saw
Article number
Rated voltage
Rated no-load speed
Max. cutting depth with 160 mm saw blade diameter
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Base plate dimensions
Saw blade diameter
Max. base blade thickness
Max. tooth thickness/offset
Locating bore
Weight according to
A)
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
B)
ure during operation and
during storage
Compatible rechargeable
C)
batteries
1 609 92A 8PC | (23.03.2023)
Circular saw
Recommended battery char-
gers
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
C) It is recommended to use batteries with the following battery ca-
D) The following chargers are not compatible with the PBA re-
Noise/vibration information
Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-5:
Sawing wood: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
UniversalCirc 18V-53
ent the main applications of the power tool. However, if the
3 603 CB1 400
power tool is used for other applications, with different ap-
V= 18
plication tools or is poorly maintained, the vibration level
-1
min 4300 and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
mm 53
To estimate vibration and noise emissions accurately, the
mm 36
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
mm 288 x 153
This may significantly reduce vibration and noise emissions
mm 160
over the total working period.
mm 1.5
Implement additional safety measures to protect the oper-
mm 2.0
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
mm 20
and organising workflows correctly.
kg 3.3 (2.0 Ah)
3.6 (6.0 Ah)
Rechargeable battery
°C 0 to +35
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
°C –20 to +50
tery is included with the power tool by looking at the pack-
aging.
PBA 18V...W–.
Charging the battery
u
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
D)
pacity: ≥ 2.5 Ah
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector sum) and uncertainty K
h
2
< 1.6 m/s , K = 1.5 m/s
h
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
UniversalCirc 18V-53
AL 18... CV
2
Bosch Power Tools