Siemens EQ300 TF301E09 Manual De Usuario página 54

en Troubleshooting
Fault
LED lights up des-
pite empty drip tray.
LED flashes and all
beverage LEDs flash-
ing.
LEDs , and
flashing.
LEDs and
flashing.
LEDs flashing.
and
light up.
54
Cause and troubleshooting
Appliance is switched off and does not detect empty-
ing.
Switch the appliance on, and remove the drip tray.
1.
Re-insert the drip tray.
2.
Water tank is missing or wrongly inserted.
▶ Insert the water tank correctly.
Pipe system in the appliance is dry.
▶ Insert the water tank correctly.
▶ Fill the water tank with fresh, cold, non-carbonated
water.
Air is in the water filter.
Immerse the water filter in water with the opening
1.
facing upwards until no more air bubbles escape.
Reinsert the filter.
2.
Ambient temperature is too cold.
▶ Operate the appliance at temperatures over 5 °C.
Brewing unit is heavily soiled or cannot be removed.
▶ Restart the appliance.
Clean the brewing unit.
▶
Appliance has a fault.
Restart the appliance.
▶
Descaling process has been interrupted.
▶ Proceed as described in section
→ "Resetting a service programme", Page 49.