Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting Tips ...
Problem
Surface burners do not light or do not
light fully.
Flames are completely or mostly yellow
or orange.
when light button is pressed.
Oven light does not turn on when light
button is pressed.
22
Possible Cause/Solution
Ensure any gas supply valves and propane tank valve are opened.
Ensure knob is pressed and set to the HI position while the ignition
knob is turned.
Gas pressure is either too low or too high.
Cleaning section.
Ensure gas supply valves and propane tank valve are opened.
while the ignition knob is turned. Turn the ignition knob until the pilot
allow time for the oven pilot to light and for the pilot sensor to become
heated. If air is in the gas line, this process may take over a minute.
Gas pressure is either too low or too high.
of flickering orange due to dust particles in the gas or air.
Gas pressure is too low.
Cleaning section.
Installation Instructions.
LED board or switch needs to be replaced. Contact GE Appliances for
service.
the Installation Instructions.
Cleaning section.
49-2001047 Rev. 5
Publicidad
