Parkside PDSS 13 D4 Instrucciones De Utilización Y De Seguridad página 12

List of pictograms used
Please read the operating instructions!
Wear ear protection.
Wear protective gloves.
CE mark indicates conformity with
relevant EU directives applicable for
this product.
Air tool accessory set PDSS 13 D4
Introduction
We congratulate you on the purchase
of your new product. You have chosen a
high quality product. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the operating in-
structions and the safety advice below. Only use the
product as instructed and only for the indicated field
of application. Keep these instructions in a safe place.
If you pass the product on to anyone else, please
ensure that you also pass on all the documentation
with it.
Intended use
The pneumatic tyre inflator is designed for inflating
bicycle tyres, balls, airbeds, rubber dinghies, etc.
The pneumatic air blow gun is designed for cleaning
objects and hard-to-reach areas with compressed air.
Use the products only as described and only for the
specific applications as stated. The product is only
intended for private and not for commercial use. Any
use that differs to the intended use as stated above
is prohibited and potentially dangerous. Damage or
injury caused by misuse or disregarding the above
warning is not covered by the warranty or any lia-
bility on the part of the manufacturer.
12 GB/IE
Wear eye protection.
Wear a dust mask.
Dispose of packaging properly.
Do not dispose of the product in
b
a
household waste!
Parts description
After unpacking the product, please check that all of
the package contents are present and that the product
is in perfect condition. Do not use the product if it is
defective.
Manometer
1
Pneumatic tyre inflator with pressure gauge
2
Vent valve
3
Barbed fitting
4
Hose with straight valve connector
5
Trigger lever
6
Pneumatic air blow gun
7
Extension nozzle
8
Accessories:
Attachment for ,
9 14
Ball needle
10
Universal adapter for valves with internal
11
diameter of approx. 9 mm
Universal adapter for valves with internal
12
diameter of approx. 6 mm
Valve adapter e.g. for bicycle tyre valves
13
Universal adapter for valves with internal
14
diameter of approx. 8 mm
Adapter for threaded valves, e.g. for dinghies
15
Adapter for vent valves
16
,
15 16