1 – 10239 (long address)
• Every address can be programmed manually.
• A short or a long address is selected using the CVs.
• A multiple unit address that is being used deactivates the
standard address.
Programming
• The characteristics can be changed repeatedly using the
Configuration Variables (CV).
• The CV numbers and the CV values are entered directly.
• The CVs can be read and programmed repeatedly. (Pro-
gramming is done on the programming track.)
• The CVs can be programmed, as you desire. PoM (Pro-
gramming on the layout track) is only possible with those
CVs marked in the CV table. PoM must be supported
by your central controller (see the instructions for your
controller).
• The default settings (factory settings) can be produced
repeatedly.
• All of the functions can be controlled according to the
function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.
10
Controllable Functions
Headlights / Red marker light
Current-conducting coupler (lighting for
all cars)
Interior lights
Sound effect: Horn
Engineer's cab lighting
Sound effect: Squealing brakes
Sound effect: Opening doors
Sound effect: Doors being closed
Sound effect: Conductor whistle
Sound effect: Short horn blast
Sound effect: Bell
Sound effect: Doors closing (with
announcement)
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11