Publicidad
Idiomas disponibles
Idiomas disponibles
OWNER'S MANUAL | ASSEMBLY GUIdE
Place the oven base on its back. Remove the four (4) M8
STEP 02
flange nuts from the four (4) oven feet.
Use the four (4) M8 flange nuts to attach the heat shield and four (4)
oven feet to the bottom of the oven base.
Remove the eight (8) M6x12 screws from the oven body
STEP 04
side panels.
Use four (4) M6x12 screws to install one (1) side handle and two (2)
mica sheets to the oven body left side panel.
Repeat with the oven body right side panel.
06
Remove the oven body from its packaging and place it on a
STEP 03
smooth flat surface.
Remove the four (4) tapping screws from the upper brackets.
Use the four (4) tapping screws to attach the vent cover to the
upper brackets.
Slide the square stone into the upper oven chamber
STEP 05
brackets.
Center the round stone on the floor of the oven chamber.
Remove the one (1) M5 screw from the door handle. Use
STEP 06
the one (1) M5 screw to attach the door handle to the front of the
oven door.
MODEL: 6961
BLACKSTONEPRODUCTS.COM/SUPPORT
Publicidad
