Descargar Imprimir esta página

FLINQ Nova FQC8310 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
EN
Manual
- This is not a TOY, keep away from small children below 12 years.
- Do not open or disassemble the lamp or adapter yourself, this will void the
warranty at all times.
- Do not disassemble, repair or modify the product by yourself as this may
result into an electric shock.
- Do not look directly into the lamp beads as it could hurt your eyes.
- The led source is not replaceable.
- If the cable or adapter is damaged or broken please contact your seller for
correct replacement by the manufacturer only.
- Do not stand, sit on, jump or throw with the lamp at all times.
- Do not throw this product in the air as it may cause damage by falling.
- Only use the lamp for its intended designed use as a light.
- Take good care of the product and clean it regularly.
- Never touch the plug contacts with sharp or metal objects.
- Use only the original power supply and original accessories.
- Do not use the device outdoors with heavy rain
- Protect the device from special liquids and vapors.
Note
- Please note that the power port of the device should not be infiltrated by
lots of water. Otherwise, it will cause a product failure.
- Do not charge or store the product in a place below 0c or above 40c,
otherwise the product performance will be reduced.
- It is a normal phenomenon that temperature of the adapter rises during
use.
Safety instructions
- Do not install/use/throw near a gas, electric radiator, fireplace, candles,
or other sources with a similar heat or explosion/flammable liquids and
gasses.
- Damage from this housing/ device can cause explosion and/or fire.
- Do not staple, nail, or hook the power cable.
- Never touch the plug contacts with sharp or metal objects.
- Do not hang the device only by the electric cables.
- An electric product is not a toy! To avoid the risk of fire, burns, injuries
or electric shock, the power cable should not be left within the reach of
children.
- Do not use the product outside its intended use.
- Do not hang ornaments or other objects on the device cables.
6
- Do not close windows and doors on the power cord so as not to damage
the insulation.
- Do not cover the product with a material (paper, cloth, etc.) that is not part
of the product when in use.
- Read and follow all instructions that are indicated on the product or
supplied with it.
- Keep this manual for future reference.
Operation and use
Special use features
1. This product is powered / charged by a 5V USB Type-A adapter (optional
available) with minimum 1000mA = 1A (5W) output. The specially
designed Type-C power cable is included and to be used for this lamp
only! It can be used wireless and wired as 2 modes of use.
2. This product has a stepless dimmer function for the light to select as
needed by using the touch button on the top of the lamp
Charge Fully before the first use!
Use only the supplied USB-C to USB-A charge cable and connect it with
the TYPE-C charge input connection. You can use any available USB power
source / adapter (optional) with 5V DC 1A (1000mA) minimum power. The
full charging time is approximately 5-6 hours for the lamps internal battery.
The RED led light is indicating that the lamp is being charged. When the RED
led is OFF and GREEN is ON it means the battery is fully charged. Remove
charging cable from the device when ready and disconnect the source/
adapter from the mains power socket.
Battery warning note
New batteries must be recharged and discharged 3 ~ 5 times before their
full function use time is released. Charge indoors only at room temperature
and only under supervision during daytime. Disconnect from the charger
when the battery is fully charged, as overcharging can shorten battery life.
Lithium batteries should only be charged with constant current/constant
voltage (CC/CV). When not in usage, the charge in a fully charged battery
slowly disappears. Do not place the product near a heat source or expose
it to direct sunlight, dust, moisture, rain or mechanical impact. Try to keep
the battery temperature between 0°C and 45°C at all times. If the battery is
too hot or too cold, the product may not work temporarily, even if it is fully
charged. Do not attempt to charge the device when the battery is damaged.
FlinQ Tablelight Nova
7

Publicidad

loading

Productos relacionados para FLINQ Nova FQC8310

Este manual también es adecuado para:

Nova fqc8311Nova fqc8312Nova fqc8313Nova fqc8314