Pull the mains plug out of the socket.
Open the top cover of the dust collector
(A).
Lift up and remove the filled dust bag (B).
Dispose of the filled dust bag in a suitable
dustbin.
Make sure that the slider on the new dust
bag is open before use (C).
D
Insert a new dust bag into the holder (D).
Check that the dust bag is correctly
seated in the lifting device.
Close the top cover of the station (E).
Reconnect the mains cable to the socket.
11.3. Cleaning the side brush
Clean the side brushes regularly.
Switch off the appliance and place it
upside down onto a flat surface with the
bottom of the appliance facing upwards.
Clean the brushes to remove dirt and
hair.
Remove stubborn dirt from the brush
using a damp cloth.
152
C
E
Fig. 24 – Removing/cleaning the side brush
If hair or other dirt has become wrapped
around the side brushes or the holder,
remove and clean the side brush.
Pull the brush upwards and off.
After cleaning, place the brush vertically
on the drive shaft and press it down with
an audible click.
If the bristles become bent, place the brushes
in hot water so that the bristles return to
their original shape.
Replace the brushes at intervals of 3-6
months depending on the degree of wear to
ensure good cleaning performance.
Please visit our MEDIONServiceshop
at https://www.medion.com/
medionserviceshop to order any spare parts
you need.
You will be able to find out all the details
about your specific product while you're
there.