Sinbo SHB 3092 Manual página 9

UNPACKING INSTRUCTIONS
1. Place the box containing your Super Powerful Chopper on a flat.sturdy surface before unpacking.Be
sure the box is right side up.
2. Remove top foam piece and carefully lift Super Powerful Chopper unit from box.
3. Remove Instruction Manual from box.
4. Place the Super Powerful Chopper on a counter or table and read the instructions thoroughly before
using the machine.
5. Save the shipping cartons and foam blocks.You may want to use them at a later date.
6. To assemble and operate the Super Powerful Chopper.follow the "Chopper Assembly and Operation"
instructions on pages 3 and 4 of this Instruction Booklet.
Before using for the first time.Wash all parts according to the "Cleaning and Maintenance" section on
page 5 of this booklet to remove any dust or residue.
USE CAUTION WHEN HANDLING CHOPPING BLADE.
CHOPPER ASSEMBLY AND OPERATION
1. CHOPPER LID, 2. CHOPPER BLADE, 3. CHOPPER BOWL, 4. CHOPPER LEVEL, 5. CHOPPER UNIT
CHOPPER ASSEMBLY
DO NOT PLUG IN THE SUPER POWERFUL CHOPPER UNTIL
COMPLETELY ASSEMBLED AND READY FOR OPERATION
1. Firmly press Chopping Bowl(C) onto Base Unit(E). Carefully
place Chopping Blade (B)onto center shaft of Base Unit until it
clicks into position
2. Add Chopper Lid (A) to Base Unit by aligning blue dot on Chopper
Lid with blue dot on Base Unit(as shown).
3. Twist Chopper Lid counter-clockwise until it clicks into
place.The Super Powerful will not start unless the Chopper Lid
is locked into place
CHOPPER OPERATION
1. Remove Chopper Lid by turning it Clockwise. Add desired
amount of food into Chopping Bowl. BE CAREFUL NOT TO TOUCH
CHOPPER BLADE. Do not fill Chopping Bowl with more than
recommended of food quantity.Replace Chopper Lid and turn
counterclockwise until it clicks into place
2. Plug unit into outlet. Press and hold Start Lever (D) to begin
chopping.
Release Start Lever to stop. To avoid overheating unit, do not
hold down Start Lever for more than 3 seconds at a time.
3. Unplug unit. Remove Chopper Lid by turning clockwise.
Carefully remove Chopping Blade by pressing and holding center button while pulling straight Up, Hold
Base Unit with one hand while slowly removing Chopping Bowl to avoid spilling contents.
CLEANING AND MAINTENANCE
1. Always unplug your Super Powerful Chopper from the electrical outlet before cleaning.Before first
use and after every use.clean each part thoroughly.
Periodically, check all parts before reassembly. If any part is damaged or cracked, DO NOT USE THE
1
1
- 8 -
2 3
2 3