Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CONNECTION
Before making any connections, switch off all devices and disconnect them from the mains.
It is advisable to read the entire manual before connecting the devices.
1.- Install the satellite antenna and point it towards the satellite.
2.- Connect the antenna to the receiver.
3.- Connect the receiver to the TV according to the connection that best suits your requirements.
4.- Once the connections have been made in accordance with your needs, connect the devices to the
mains and switch them on.
OPERATION
NOTE: the default PIN code will be 0000.
INSTALLATION (FIRST USE)
If you are using the tuner for the first time or have restored it to its factory settings, the following menu will
be displayed. Select the menu language (OSD) and perform a channel search (SATELLITE LIST) or load a
channel list from USB (IMPORT/EXPORT).
Once this initial configuration has been completed, you can access this menu again after entering the menu
by pressing the MENU button and then the FAV button on the remote control.
NOTE: these units have a pre-loaded channel list, if you perform a channel search or load a channel list from
USB, these will be added to the existing ones.
CHANNEL SEARCH
If you want to search for channels, go to the CHANNEL LIST option on the home screen or in the INSTALLATION
menu. From this menu you can search by pressing the blue button on the remote control.
- 4 -
Publicidad
