Mobiclinic CMS60F Manual De Instrucciones página 22

Pulse oximeter
FR IT DE PT NL PL DK
ES EN SWE
• When it is carried from cold environment to warm or humid environment, please do not use it immediately.
• DO NOT operate keys on front panel with sharp materials.
• High temperature or high pressure steam disinfection of the Oximeter is not permitted. Refer to User Manual in the
relative chapter (7.1) for instructions of cleaning and disinfection.
• DO NOT have the Oximeter immerged in liquid. When it needs cleaning, please wipe its surface with medical alcohol
by soft material. Do not spray any liquid on the device directly.
• When cleaning the device with water, the temperature should be lower than 60'C.
• The fingers which are too thin or too cold may affect the measure accuracy, please clip the thicker finger such as
thumb and middle finger deeply enough into the probe.
• The pulse Oximeter can be used to adult,child and infant.Whether the device is used to adult or children, it depends
on the probe selected.
• The update period of data is less than 5 seconds, which is changeable according to different individual pulse rate.
• Please read the measure value when the waveform on screen is equably and steady-going. This measure value is
optimal value,and the waveform at the moment is the standard one.
• If some abnomal conditions appear on the screen during test process, pull out the finger and reinsert to restore
normal use.
• The device has normal life for three years since the first electrified use.
• The device has alarm function, users can check on this function according to chapter 6.1 as reference.
• The device has the function of limit alarm.When the measure data is beyond the highest or lowest limit, the device
would start to alarm automatically if the alarm function is on.
• The device has alarm function. This function can either be paused, or closed for good.This function could be turned
on through menu operation if you need.Please check the chapter 6.1 as reference.
• The sign "BATTERY" in the PCB board means where the lithium battery should be welded, and the symbol "+" indicates
the battery anode.
• The device may not work for all patients.If you are unable to achieve stable readings, discontinue use.
2. OVERVIEW
The pulse oxygen saturation is the percentage of HbO2in the total Hb in the blood, so-called the O2 concentration in
the blood. It is an important bio-parameter for the respiration. A number of diseases relating to respiratory system may
cause the decrease of SpO2in the blood, furthermore, some other causes such as the malfunction of human body's
self-adjustment, damages during surgery, and the injuries caused by some medical checkup would also lead to the
difficulty of oxygen supply in human body, and the corresponding symptoms would appear as a consequence, such as
vertigo, impotence, vomit etc. Serious symptoms might bring danger to human's life. Therefore, prompt information of
patients' SpO2 is of great help for the doctor to discover the potential danger, and is of great importance in the clinical
medical field.
The Pulse Oximeter is small in volume,convenient in operation and portable.It is only necessary for patient to put one
finger into probe for diagnosis,and display screen will directly show the measure value of pulse oxygen saturation with
the high veracity and repetition.
2.1. Features
• Operation is simple and convenient
• Small in volume, light in weight and convenient to carry.
• Low power consumption.
2.2. Major Application and Scope of Application
The Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product
is suitable for being used in hospital, oxygen bar, community healthcare, physical care in sports (It can be used before
or after doing sports and it is not recommended to use the device during the process of having sport) and etc.
The problem of overrating would emerge when the patient is suffering from toxicosis which caused by carbon
monoxide, the device is not recommended to be used under this circumstance.
22