Publicidad
the product. Check the securing of the fixation after each operation. Fixing a certain
position in most cases is accompanied by a clicking sound.
COMPONENTS - FIGURE 1: А. Main body of the walker; В. Board with toys; C. Seat; D.
Back wheels; E. Front wheels;
toy; I. Screw; J. Stoppers
PRODUCT ASSEMBLY
Strictly follow the instructions and sequence for assembling the product as shown in
the diagrams from 2 to 7.
2.Unfold the walker. When it is fully extended and locked you will hear a clicking sound.
3. Place back wheels under the walker's basic, as shown on figure 3. Place the stoppers
on the walker's basis. Fix each stopper with one screw.
4. Attach the seat to the walker, as you insert the clamps in the corresponding
openings.
5. Attach the toys to the toybar, as you be careful to insert the clamps into the holes.
Attach the toybar into the intended tray space, as you be careful to insert the clamps
into the holes.
6. After this, turn the clamps on left or right to lock the toybar.
7. The baby walker is ready now to be used. When unfolding the walker always check
whether the supporting mechanism is correctly secured before placing the baby in the
walker.
IMPORTANT INFORMATION FOR THE BATTERIES – FIGURE 8:
Find the battery compartment cover. Use a screwdriver to loosen the cap screws. Take
it off. Insert 2 1.5 V type AA batteries (not included), observing the polarity marked on
the bottom of the compartment. Put the battery cover back on and tighten the screws
with a screwdriver. Do not overtighten. Always use 2*1.5V "AA" batteries.
WARNING!
•
Only an adult should handle the batteries.
•
Keep children away from batteries. NEVER allow children to play with or charge
the battery.
•
Always use new batteries.
•
If you are not going to use the product for a long time, remove the batteries.
•
Remove used batteries from the product and dispose of them in the designated
areas, not in household waste containers.
•
Do not dispose of batteries in a fire as there is a risk of explosion or leakage.
•
Non-rechargeable batteries are not to be recharged.
•
Use only the type of battery recommended by the manufacturer.
•
Different types of batteries are not to be mixed.
•
New and used batteries are not to be mixed.
•
Batteries are to be inserted with the correct polarity.
F. Front panel toy; G. Front panel toy; H. Front panel
17
Publicidad
