Descargar Imprimir esta página

Interstate Batteries IB WAVE Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
1. Battery clamps
2. Bluetooth Status (blue) LED
3. Battery Status (green) LED
4. Check (red) LED
5. Reset power button
5. INSTALLING THE APP
5.1 Download and install the App:
IB WAVE Connect (Apple store or
Google Play).
NOTE: For Apple devices, requires iOS
12.0 or later; Android devices, OS 5.1
or later.
5.2 NEW USER SETUP
When using the App for the first time,
you must complete Registration.
1. Run the App on your mobile device.
2. Select NEW USER.
3. Fill in all required fields, review terms
and conditions, and if agreeable, check
the box for AGREE TO TERMS AND
CONDITIONS. Press CONTINUE.
4. Log in: Enter the email address
provided during registration. Check
the box for REMEMBER ACCOUNT.
Press LOG IN.
ORIGINAL INSTRUCTIONS
4. FEATURES
2
3
4
5
CONNECT
6
ENGLISH
6.1 Before you test a battery in a vehicle,
turn off the ignition and make sure
1
all electronic accessories are in the
off position. Close all of the vehicle's
doors and trunk lid.
6.2 Make sure the battery terminals are
clean. Use a wire brush to clean them, if
necessary. NOTE: This tester works best
if the battery connectors have been
removed and the battery posts have
7.1 CONNECTING TO DEVICE
1. Run the App on your mobile device
and log in.
2. Press Scan+ in the upper right
corner of the HOME screen. (If the
TEST icon is red, the tester is connected;
no need to proceed to Scan+.)
3. Once the tester shows on the screen,
select Press to Connect to connect.
4. When connected, press CONNECTED
CONTINUE. The system will scan and
find the tester.
In this screen as shown right, the user may
create a name for the tester. Swipe the
TEST
area of the active tester to bring up
EDIT
the
option.
6. CONNECTING THE TESTER
been cleaned. Any corrosion between
the tester clamps and the battery
connectors or between the battery
connectors and the battery posts will
degrade the tester's efficiency.
6.3 Connect the positive (red) clamp to
the positive (POS, P, +) battery post.
Connect the negative (black) clamp to
the negative (NEG, N, –) battery post.
7. OPERATING INSTRUCTIONS
7
ORIGINAL INSTRUCTIONS

Publicidad

loading