Publicidad
SECTION
II. GETTING
READY TO SEW
Connecting
Machine
to Power Supply
_1_Power supply plug
_2_Power switch
'_3_ Outlet
_4_Machine socket
@ Machine plug
_6_ Sewing light
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1. Turn off the power switch ,_2_.
2. Insert the machine plug@ into the machine socket (4_.
3. Insert the power supply plug _l_ into the outlet _3_.
4. Turn the power switch _f)_to activate the power and
sewing light,,_6_.
Before
Using Your Sewing
Machine
Before using your sewing machine for the first time, place a
waste fabric under the presser foot and run the machine
with thread for a few minutes. Wipe away any oil which may
appear.
For Your Safety
* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts, such as the thread
take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended
- When attaching or removing any parts
- When cleaning the machine
* Do not place anything on the foot contr
not
sewing.
Polarized
Plug
This appliance has a
the other). To
is intended to fit in
plug does not fit in
not fit, contact a qu
outlet. Do not modify
Foot Controller Model
Sewing Machine Model
numbers 000 through 999).
electric s]
outlet
le wa
_g. If it still does
Jlthe proper
is used with
represents
Controlling
Sewing
Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
/
Publicidad
