Nevadent NMD 3.7 B6 Instrucciones De Servicio página 24

8.2 Setting the water jet
intensity
You can set three different water jet intensi-
ties on the dental water jet:
LED
soft water jet:
soft at the beginning, for sensitive
gums, for gentle gum massage
normal normal water jet
strong water jet:
for advanced users, strong
jet
gums, intensive cleaning of the
spaces between the teeth
NOTE: if you have not used a dental water
jet before, please start on the soft setting so
that your gums can get used to the water jet.
At a later time you can increase the water jet
intensity to normal and jet. The pressure
should always remain pleasant.
• Press the mode 7 button repeatedly
until the desired LED 10, 9 or 8 is lit.
8.3 Before initial use
1. Rinse the nozzle attachments 2 under
running water.
2. Clean the water tank 19 and the dental
water jet 12 (see "Cleaning / Hygiene
requirements" on page 23).
3. Fill the water tank 19 with clean tap
water (see "Filling the water tank" on
page 21).
4. Insert a nozzle attachment 2 into the
holder 4 so that it clicks into place.
5. Point the nozzle 1 at a washbasin and
switch the dental water jet 12 on with
the on/off switch
6. Let the dental water jet 12 run until the
water tank 19 is empty in order to rinse
through the pipes inside. The dental wa-
ter jet is now ready for use.
22 GB
Jet intensity
6.
8.4 Using the dental water
jet
1. Take the dental water jet 12 off the bat-
tery charger 15.
2. Insert a nozzle attachment 2 into the
holder 4 if necessary so that it clicks
into place.
3. Fill the water tank 19 with fresh tap wa-
ter.
4. To set the water jet intensity, press the
mode 7 button repeatedly until the de-
sired LED is lit:
- LED soft 10:
soft water jet
- LED normal 9:
normal water jet
- LED jet 8:
strong water jet
5. Insert the nozzle 1 into your slightly
open mouth and lean over a washbasin
so that water and rinsed-out food parti-
cles can flow out.
6. Switch on the dental water jet 12 with
the on/off switch
7. To start the cleaning process, direct the
water jet at the spaces between your
teeth and the edges of the teeth.
Figure C: hold the nozzle 1 in such a
way that the water jet can flush the
food residues away from your gums.
8. Move the nozzle 1 slowly from one
space between two teeth to the next.
Use this method to clean all of the exter-
nal and internal surfaces.
9. To massage your gums, direct the water
jet at your gums.
10. When no more water is coming out of
the nozzle 1, the water tank 19 is emp-
ty. Switch off the dental water jet 12
and replenish the water tank. When the
device is switched on again, the device
will automatically start on the last select-
ed water jet setting.
11. To switch off the dental water jet 12,
press the on/off switch
take the nozzle 1 out of your mouth un-
6.
6. Do not