auronic AU3228 Manual De Instrucciones página 31

3.7.2 Delayed start time
Make sure the product is turned off.
Make sure that the timer function has not been previously set. If 'Hr' is visible on the display, the
timer function has already been set.
Touch (repeatedly) the timer button to set the desired time. After the hours shown on the
display, the product will turn on automatically.
3.7.3 Timer deactivation
Touch the timer button to deactivate the timer function.
3.8 Indicator lights
At the top, 3 LED lights shine at the bottom of the control panel to indicate the humidity of the
room.
Red: >70%
•
Green: 50 to 70%
•
Blue: >30 to 50%
•
3.9 Drain hose
In general, the water is collected in the collection tray. If you want
continuous water drainage, you need to follow the following steps to get
the situation as shown in the image.
1. Unplug the power cord.
2. Insert the drain hose into the drain hose opening. Always make sure
the hose runs down and is not blocked or kinked.
3. Make sure the hose is in a bucket or something similar to catch the
water.
3.10 Notes
The dehumidification function stops during defrosting.
•
Do not unplug or turn off the product during defrosting.
•
The product is designed to remove unpleasant humidity in everyday life and to be used
•
for additional drying of washed clothes indoors. This product is not suitable for keeping the
humidity very low (±50% or less).
This product does not have a cooling function. It produces heat during use and the
•
temperature in the room increases by 1 to 4°C. The temperature increases if the product is
used in a cabinet or similar. In addition, the temperature in the room increases when doors
and windows are closed and heat is produced by other appliances in the room and solar
radiation.
Please note that it may take ±3 minutes before the dehumidification program will start.
•
The efficiency of the product is affected by the air. Preferably keep windows and doors
•
closed in the room where the product is placed.
English
31