CAR REPAIR SYSTEM LI-ION BATTERY PACK Manual De Instrucciones página 6

EN
Before switching on the power tool, read the
operating manual!
Device is suitable for use indoors only. Store
electric power tool and batteries in dry rooms.
There is a risk of electric shock in case of in-
correct use.
Only charge batteries at temperatures be-
tween 4°C to 40 °C. Protect the battery from
heat, e.g. from continuous exposure to sunli-
ght and fire.
New battery pack need to be charged before use.
Remove the battery pack from the tool for charging when convenient for you and your job. Li-ion batteries
do not develop a "memory" when charged after only a partial discharge. It is not necessary to run down the
battery pack before placing it on the charger.
The battery packs not in often use need to be charged for each 3 months.
The long-time uncharged battery pack may enter into a "sleep" status due to the gradually dropping down
of voltage, charger may not be able to reactivate it. Such battery pack needs to be sent to the service center
to reactivate with special equipment. The reactivation is not guaranteed to be successful subject to battery
condition.
6
SPECIFICATIONS
Art. No
Rated Input Power
Output 1
SYMBOLOGY
WHEN TO CHARGE THE BATTERY PACK
LI-ION BATTERY PACK
27Wh
10.8 VDC, 2.5Amps
Do not throw battery in the fire.
There is a risk of explosion.
Do not expose the device to rain, keep the de-
vice away from water.
Recycling raw materials instead of waste dis-
posal. Do not throw the electric power tools
into the household waste! Power tools must
be collected separately and recycled in an en-
vironmentally friendly manner.