EN
STORAGE AND MAINTENANCE
Remove batteries from charger or tools when not in use.
Pack batteries with poly-bag or case, avoid the electrical contracts being touched or short circuited during
storage and transportation.
Store your battery park in a cool, dry place.
WARNING
To reduce the risk of injury, always remove the battery from the charger or tools before performing any
maintenance.
Never disassemble the battery . Contact a service facility for ALL repairs.
Clean out dust and debris from battery pack vents and electrical contacts by blowing with compressed air.
Remove dirt and dust from the housing with a paint brush or dry cloth, keeping away from all electrical
contacts.
Never use flammable or combustible solvents around batteries, charger, or tools.
Never immerse your battery or charger in liquid or allow a liquid to flow inside them.
Reduced operating times after recharging indicates that the battery is worn out. The battery must be re-
placed.
Follow the instructions for charging the battery in the operating instructions for the electric power tool and
the battery charger
EXEMPTION FROM LIABILITY
The manufacturer and his representative are not liable for any damage and lost profit due to interruption in
business caused by the product or by an unusable product.
The manufacturer and his representative are not liable for any damage which was caused by improper use of
the battery pack or by use of the battery pack with products from other manufacturers.
7