Lorelli MARCEL Instrucciones De Uso página 5

PARTS
Picture 1
Position 1 - Seat frame, seat and harness
Position 2 - Front and Rear legs
Position 3 - Tray / 1 pc. /
ASSEMBLING OF THE PIPES
Push the button „А" Picture 2 and insert the pipe „B".Installation is successfully completed when the
spring leaf extend out.
UNFOLDING
Pull the locking lever between the legs upwards (Picture 3) and open the legs.
Warning: Always release the locking hook !
Damages of the chair mechanism due to incorrect usage are not subjects of the warranty.
INSTALLATION OF THE FRONT AND REAR LEGS
Insert front pipe into the backrest tube „А" and rear pipe into the supporting lever of dining plate „В" at
the same time as shown on Picture 4. Installation is successfully completed when the spring leaf
extend out. (during assembly, note that the distance between the tubes in the upper part of the front
legs is narrower than that of the rear).
INSTALLATION OF THE DINING PLATE
Place the pipe on the tray into the plastic console of the backrest. Picture 5 Installation is successfully
completed when the spring leaf extend out.
to fasten the clips to the tube underneath
sound. F asten the tic tac button „B". Now the feeding chair is ready for use.
For safety of the child when is in the seat use the seat belt. This high chair can only be used with
feeding tray in place. It is necessary to use seat belt, when the child is in the seat.
After using, r elease the
the tray. Picture 6 L ift the tray firmly to release the clips from the tube
the legs upwards (Picture 8) , fold the legs together and turn the tray over the back Picture 9.
Warning: To avoid serious injuries always use seat belt !
The harness comes part fitted to the
lock the safety belt insert the plastic elements (1) into the central buckle . To unlock the safety belt,
press both plastic elements „B" and pull them out (2).
ASSEMBLY OF THE HIGH CHAIR
Open the seat frame fully and press the tray down firmly
Picture 6. The dining plate is locked when you hear "click"
FOLDING OF THE HIGH CHAIR
tic tac button „B", underneath the tray
USING OF THE SEAT BELT
seat. Adjust the length of the belts with sliders „А" Picture 10. To
Picture 6. R
. Pull the locking lever between
5
elease the clip " A" under