Hama DR1560CBT Instrucciones Breves página 5

1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• DR1560CBT Digital Radio with CD
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commercial use
only.
• Do not use the product in areas in which electronic
products are not permitted.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• As with all electrical products, this device should be kept
out of the reach of children.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits given
in the specifications.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately in accordance
with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Do not use the product in a damp environment and avoid
splashing water.
• Only use the article under moderate climatic conditions.
• The product is intended only for use inside buildings.
• The product must only be operated on a supply network
as described on the type plate.
• Route all cables so there is no risk of tripping.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the
cable, never on the cable itself.
Warning - laser
• Do not look directly at the laser beam! Close your eyes
and turn your head away if your eyes meet the laser
beam.
• Do not look directly at the laser beam using optical
instruments!
• This product contains a class 1 laser for consumers
compliant with EN50689:2021.
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, the adapter
cable or the mains cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
Warning
• High sound pressure level!
• There is a risk of hearing damage.
• To prevent hearing loss, avoid listening at
high volume levels for long periods.
• Always keep the volume at a reasonable
level. Loud volumes, even over short periods, can cause
hearing loss.
• Using this product limits your perception of ambient
noise. For this reason, do not operate any vehicles or
machines while using this product.
4. Commissioning
Note - optimising reception
• Please note:Always pull the antenna out completely.We
recommend you adjust the antenna vertically to ensure
optimal reception.
4.1 General notes on use
4.1.1 Switch On / Off / Standby
• Press [POWER/VOLUME/ENTER/NAVIGATE] (5) to
switch on the radio.
• Press and hold [POWER/VOLUME/ENTER/NAVIGATE]
(5) for 3 seconds to switch the radio off (standby).
• To completely switch off the device, disconnect it from the
power supply.
4.1.2 Navigation and control
• After pressing a shortcut button, navigate through the
menu items using.
• Select the individual menu items by turning [POWER/
VOLUME/ENTER/NAVIGATE] (5).
• Confirm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (5).
3