Parkside PFR 28 B3 Traduccion Del Manual De Instrucciones Originale página 12

GB MT
Connection with adapter
1. Attach the adapter (1) to the extension
element (4) or the connecting element
(5) and turn it through 90° until it locks
into place (bayonet locking device).
Screw the cap nut (3) of the extension
element (4) against the adapter (1).
2. Connect the spray gun (bayonet locking
device) and screw the cap nut (2) of the
adapter (1) against the spray gun.
To release
1. Release the retainer nut of
adapter ( 2) on the adapter (
2. Loosen retainer nut (3) on the extension
element (4).
3. Release the catches by pushing and
turning through 90° in the opposite di-
rection (Bayonet catch).
Changing the spray
nozzles
1. Remove the safety clips (11) using a
sharp object (for example a screwdriver).
2. Press the preassembled spray nozzles
out of the holder (ideally using a screw-
driver or similar).
3. Press the new spray nozzles into the
holder.
4. Secure the spray nozzles again with
the safety clips.
Start­up
Working instructions
Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
12
• Do not release water from the pressure
washer until the patio cleaner rests on
the surface you are cleaning.
• Always hold the patio cleaner by the
handle (8) when washing down walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed for
scouring out or scrubbing.
Pressure control
1. You can adjust the pressure of the
escaping water jet by turning the pres-
sure regulator (9). Accordingly, the
1). rotation speed of the nozzles changed
2. Increase the pressure (+) by turning the
pressure regulator (9) in a clockwise
direction. Reduce the pressure (–) by
turning the screw counterclockwise
connnections.
Cleaning and
Maintenance
Always remove the mains plug of
the high pressure cleaner before
working on the device. There is a
risk of electric shock or injury from
moving parts.
Cleaning
Always keep the washer clean. Do
not use any detergents or solvents.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
Maintenance
The device is maintenance-free.