Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Steam leaks from the
door.
There is water left in
the oven.
The brightness inside
the oven varies.
Cooking is finished,
but the cooling fan is
still running.
Pressing the +30sec
button operates the
oven.
Turntable
While turning, the
turntable comes out
of place or stops
turning.
The turn table drags
while turning.
The turn table rattles
while turning and is
noisy.
58 English
MS14K6000AS_AA_DE68-04345Q-02_EN+MES.indb 58
Cause
Water or steam may be
generated by the cooking or
defrosting process, depending
on the food. This is not an oven
malfunction.
Water or steam may be
generated by the cooking or
defrosting process, depending
on the food. This is not an oven
malfunction.
Changes in brightness reflect
changes in power output. Power
output changes depending on
the functions in use.
To ventilate the oven, the
cooling fan continues to run for
about 5 minutes after cooking is
complete.
This happens when the oven was
not operating.
There is no roller ring, or the
roller ring is not properly in
place.
The roller ring is not properly
in place, there is too much food,
or the container is too large
and touches the inside of the
microwave.
Food residue is stuck to the
bottom of the oven.
Action
Let the oven cool and then wipe
with a dry dish towel.
Let the oven cool and then wipe
with a dry dish towel.
Power output changes during
cooking are not malfunctions.
This is not an oven malfunction.
The microwave oven is designed
to start operating when you
press the +30 sec button if it was
not operating.
Install the roller ring and then
try again.
Adjust the amount of food and
do not use containers that are
too large.
Remove any food residue stuck
to the bottom of the oven.
2018-08-30
6:52:59
Publicidad
