Mighty Seven DOS-501 Manual De Instrucciones página 11

TO ATTACH VACUUM
ADAPTOR (FIG. 2)
FIG. 2
Groove
Raised Rib
The vacuum adapter allows you to connect
a 2-1/2 in. diameter vacuum hose to help
keep the work area clean.
To install:
1. Detach the battery pack from the
sander.
2. Align the raised rib of the dust-exhaust
port with the groove of the vacuum
adaptor (FIG. 2).
3. Slide the vacuum adaptor forward and
push it onto the dust-exhaust port until
it is firmly seated.
NOTICE: From time to time, clean the vac-
uum adaptor with a dry brush.
To remove:
1. Detach the battery pack from the
sander.
2. Grip the adaptor firmly and pull it out
from the tool.
OPERATION
ATTACHING THE DUST BAG
WARNING:
bag when sanding metal. Using the dust bag
when sanding metal creates a fire haz-ard, which
could damage the tool and lead to serious
personal
WARNING:
from
polyurethanes, linseed oil, etc., can self-ignite
in the sander dust bag or elsewhere and cause
fire. To reduce the risk of fire, al-ways empty the
dust bag frequently while sanding and never
store or leave a sander without totally emptying
its dust bag. Also follow the recommendations of
the coating manufacturers.
Your
collecting bag to help you keep the working area
clean. The dust bag is ideal for smaller jobs.
To install:
1. Detach the battery pack from the
sander.
2. Align the indicators on the vacuum
adaptor and the dust bag.
3. Slide the dust bag forward and push it
onto the adaptor. Rotate the bag
clockwise to lock it in place (FIG. 3).
FIG. 3
TO THE ADAPTOR
Do not use the dust
Collected sanding dust
sanding surface
sander is supplied
Indicators
coatings such as
with a dust-
Lock
Unlock
11