Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 Device parts/operation controls
EN
Air outlet
1
Nozzle
2
Attachment lock
3
Rotation lock
4
Speed button
5
Temperature button
6
Temperature indicator
7
Speed indicator, 3×
8
Cleaning icon ( )
9
Lock icon ( )
10
Cool air icon ( )
11
2.3 Operation
• Clean all parts of the product before first use as described in the chapter
"Cleaning".
• The product may emit a slight smell when it is first used. This is entirely safe
and harmless. Ensure there is adequate ventilation in the room.
• Always hold onto the handle
1. Connect the power cord
2. If necessary, install one of the attachments (
See chapter "Using the attachments" for details.
For installation, gently push the attachment onto the air outlet until the attachment
locks into place.
For removal, slide the attachment lock
from the air outlet (see Fig. B).
WARNING: The attachments become very hot after use. Wait until they are cooled
down and safe to touch before removal.
3. If necessary, slide the rotation lock
use the product as a dryer or curler (see Fig. C).
Release the rotation lock once the nozzle locks into place.
4. To switch the product on, slide the standby switch
The standby switch can be set to 3 positions (off/on/lock).
5. To change the operating temperature, press the temperature button
until the desired temperature (39, 50, 70 or 90 °C / 102, 122, 158 or 194 °F) is
selected.
The operating temperature shows in the temperature indicator
6. To change the air speed, press the speed button
level (1–3) is selected.
One or more speed indicators
7. For a shot of cool air, press and hold the temperature button for around 2 seconds.
The cool air icon ( )
temperature button to cancel this function.
7
12
13
14
15
16
17
18
19
20
21
when using the product.
14
to an easily accessible power outlet.
16
3
downward and then turn the nozzle
4
illuminate to show the selected speed level.
8
illuminates when the function is activated. Release the
11
Standby switch
Filter cage
Handle
Filter mesh (inside)
Power cord
Left auto wrap barrel
Right auto wrap barrel
Concentrator
Oval brush
Paddle brush
,
,
,
,
17
18
19
20
21
downward and then lift the attachment off
to the middle position (on).
12
repeatedly until the desired speed
5
) to the air outlet
1
90° to
2
repeatedly
6
.
7
.
Publicidad
