Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: The product is not intended to be opened and/or repaired by the user.
EN
Repair of the product shall be performed by an authorized person or in the certified
service centre only.
3.1 Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
• Always disconnect the power cord and let the product completely
cool down before cleaning.
NOTICE! RISK OF DAMAGE!
• Never immerse the product in water or other liquids. Make sure
that no water or other liquids penetrate the housing.
• Do not use any aggressive cleaners, brushes with metal or nylon
bristles, or sharp or metallic cleaning utensils such as knives, hard
scrapers and the like.
1. Clean the product with a damp cloth.
2. Dry the product thoroughly with a soft and clean cloth.
3.2 Internal cleaning
• With this function, the motor operates in reverse direction to draw air from
the air outlet
• Use this function every 2 weeks or when the cleaning icon ( )
Overuse may damage the product.
1. Connect the power cord
2. Within 10 seconds, press and hold the speed button
at the same time for about 3 seconds to activate the internal cleaning mode.
The product operates in reverse direction for about 10 seconds before stopping
automatically.
3. If necessary, repeat step 2 to activate this function again.
You can only activate this function 3 times at a time. To enter the internal cleaning
mode again, you must unplug the product and start over again.
3.3 Cleaning the filter
To avoid the accumulation of dust inside the product, clean the filter cage and filter mesh
every 2 weeks.
1. Turn the filter cage
Fig. E).
2. Slide the filter cage downwards along the power cord
3. Clean the filter cage and filter mesh
4. Attach the filter cage back onto the product. Turn it to the right to lock it in place.
9
and clean the internal parts of the product with cool air.
1
to an easily accessible power outlet.
16
to the left until it detaches from the product (see step 1 in
13
with a soft cloth or brush.
15
illuminates.
9
and temperature button
5
(see step 2 in Fig. E).
16
6
Publicidad
