Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and maintenance
Pay attention to following before cleaning the shaver
–
Please ensure the shaver is switched off and unplugged from the
main.
–
To clean the external surfaces of the shaven use a damp cloth.
Do not use strong detergents or other chemicals.
–
To dry, wipe the surface of the shaver with a dry towel. Do not
use a hair dryer or heater to dry the shaver.
–
The shaver should not be cleaned by immersing into water.
–
Care for your appliance to ensure a long-lasting performance.
We recommend you clean your appliance after each use. The
easiest and the most hygienic way to clean the appliance are by
rinsing the appliance head after use with warm water.
Common and simple cleaning (Fig. E1)
1. Switch of the shaver and take off the head.
2. Tap out excess hair shavings.
3. Rinse the head of the shaver in running water.
4. Close head assembly after cleaning.
Deep Cleaning (Fig. E2 & Fig. E3)
Generally, the shaver head should be deeply cleaned after
using for 30 times (300 minutes); it is in favour of use life of
head and the shaving efficient.
1. Switch of the shaver and open the shaving unit by pressing the
release button on front of shaver.
2. Place a drop of liquid soap on the inside near each cutter.
3. Brush the soap out thoroughly with the supplied cleaning
brush.
4. Turn the lock anticlockwise and remove the retaining frame.
User Instructions
English
7
Publicidad
