3. Plug the charger into the charging base first, and then into the mains socket.
4. Charge the batteries at room temperature between 4 and 40℃.
5. While charging, the pilot light will be flashing to indicate the charger is under working. When the
charging operation is finished, the charger will switch off automatically and the pilot lights will be on
instead of flashing.
6. After charging, unplug the charger from the mains socket and the appliance. Do not use the
appliance while it is connected to the charger. Store the charger in a safe place for future charges.
The appliance is now ready for use.
INSTRUCTIONS FOR USE
1. To switch the appliance on, press the on/off button (u) on the handle. Both the LED lights on the
suction head and the pilot lights on the handheld vacuum cleaner will light on in blue.
2. You can choose the suction power by pressing the high suction power button (v) or low suction
power button (w) on the handle.
3. Animal Pro brush and LED lights on the suction head will be working or stop working at the same
time controlled by the on/off button (x) on the handle. Use the brush to clean the carpet or floor.
4. You can also push up the bending/upright lock (t) on the handle to fold the appliance inwards for
easy cleaning under the beds, desks and other similar places.
5. After use, switch off the appliance and push up the bending/upright lock on the handle to fold the
appliance for easy parking.
TO USE THE HANDHELD VACUUM CLEANER SEPARATELY
1. Press the release button to uncouple the handheld vacuum cleaner from the main body.
2. Take off the nozzle and the small square brush from the back of charging base.
3. Install the nozzle to clean corners and crevices. Install the brush to clean the upholsteries, such as sofa.
4. Press the center of on/off button for handheld vacuum cleaner to make the machine work. Press
the center of the button again to switch off the machine.
5. Put the handheld vacuum cleaner back into its place on the main body after use.
MAINTENANCE AND CLEANING
• Switch off the appliance and let it cool before undertaking any cleaning task.
• Clean the outside of the appliance with a damp cloth. Do not use abrasive products or solvents.
• Do not submerge the appliance in water or any other liquid. Make sure that no water enters the appliance.
• Remove any dirt (hair and other fibers) tangled around the brush and wheels.
CLEANING DUST CONTAINER AND FILTER
1. Uncouple the handheld vacuum cleaner. Dismantle it by pressing the release button for dust con-
tainer. 2. Take out the Hepa filter and filter protector. Empty the dust container and filter. 3. If the
parts are heavily soiled, wash the dust container, filter and its protector under running water with
detergent. Check that all the parts are completely dry before fitting them back.
CLEANING BRUSH
1. Unlock the brush from the suction head. Take it out and remove any dirt (hair and other fibers)
tangled around the roller. 2. Wash the brush under running water with mild detergent. Make sure that
it is completely dry before replacing it.
15