Truma CP classic Instrucciones De Montaje página 7

CP classic control panel and
CP E classic power selector switch
(Combi Diesel E only)
– Drill a hole with a diameter of 55 mm for each control panel
(distance between hole centres 66 mm).
– Connect control panel (1) and power selector switch (5)
using control panel connecting cable (6).
– Attention: Maximum control panel cable length 10 m.
– Attach the plug (3) of the control panel cable (2) to the
power selector switch (5). Clamp cables (2 + 6) into control
panel cable ducts.
– Route the control panel cable (2) to the heater and plug it in.
– Make sure that all plugs are engaged.
– Secure each control panel with 4 screws (4).
– Fit cover frames (10) with side parts (11).
5 5
6
Ø
2
3
3
m
m
1
4
5
11
4
10
11 10
7